Fiery Password Retrieval Tool

[RRodgers]

	Quote:			Originally Posted by JCarpenter
	I tried using this PS file to no avail. I select File< Import< password.ps Click "Add" For logical printer I select "35C-KM Direct" Click "Import" It spools to the printer, but nothing ever prints. Am I missing something?

Use the downloader.

[petergun1]

Thank you so much.

[apache_cat]

Thanks I have a feeling this is going to be very handy.

[huaypek]

thanks

[Viperone]

I managed to print the password but it's MD5 encoded.
That doesn't help much.
Any way of bypassing it?????

[dtxerox1212]

Any other ways, my case I dont have the software to reload
this is a Xerox DC 240 with embedded Fiery
thanks alot for any help

[dtxerox1212]

If you using the file "password.ps" and are getting a MD5 Hash Number too big for a 8.5x11 page,do the following
use the file attached and proceed with the same instructions on the initial post, (I edit the file attached with a smaller font this way you will get all 32 characters on the MD5 Hash) than go the web site MD5 Decrypter.com, MD5 Decryption, Free MD5 Decrypter, Security, MD5 Hash, MD5 Security.
and input your MD5 Hash,,,, and like magic your admin password will appear
good luck to all.....

PS: if you are able to read all 32 characters with the original file, you don't need to download my file (my file has a 10 point size font, original file has a 20 point size) in my case I was not able to get all characters.

[Viperone]

	Quote:			Originally Posted by dtxerox1212
	If you using the file "password.ps" and are getting a MD5 Hash Number too big for a 8.5x11 page,do the following use the file attached and proceed with the same instructions on the initial post, (I edit the file attached with a smaller font this way you will get all 32 characters on the MD5 Hash) than go the web site MD5 Decrypter.com, MD5 Decryption, Free MD5 Decrypter, Security, MD5 Hash, MD5 Security. and input your MD5 Hash,,,, and like magic your admin password will appear good luck to all..... PS: if you are able to read all 32 characters with the original file, you don't need to download my file (my file has a 10 point size font, original file has a 20 point size) in my case I was not able to get all characters.

I used Command Workstation for sending the script to the printer and thanx to that I was able to shrink the text so the MD5 fitted in on page.
I was looking for decrypting sites but non of them contained my password untill you posted the link.

Thanx for all. It's a big help.

[dtxerox1212]

	Quote:			Originally Posted by Viperone
	I used Command Workstation for sending the script to the printer and thanx to that I was able to shrink the text so the MD5 fitted in on page. I was looking for decrypting sites but non of them contained my password untill you posted the link. Thanx for all. It's a big help.

With the original file the font is just too big for the 32 characters of the MD5
to show on the letter size paper, great I'm happy it work for you too....this is just a great tool....