[Misc] SC 503 MPC 28/33

[brodera]

Hi!

Just got a call that a MPC2800 shows SC503. Lift tray from the LCT. I solved it by telling the customer to unplugg the powercord.

Since this can just pop up out of nowhere, is there any other solutions for this problem?

/Best regards!

[Nisspat]

Re: SC 503 MPC 28/33

Possibly paper behind the tray?
Lift motor?
Sensor?

[turbojetboy]

Re: SC 503 MPC 28/33

Hi!

Just got a call that a MPC2800 shows SC503. Lift tray from the LCT. I solved it by telling the customer to unplugg the powercord.

Since this can just pop up out of nowhere, is there any other solutions for this problem?

/Best regards!

I have seen a number of cases of this intermittently, it has been the little black gear under the left side lct tray - the d shape in it wears down and it intermittently stops shifting the stack accross - particularly when the left side is full.

[JustManuals]

Re: SC 503 MPC 28/33

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com