47 results in 0.0172 seconds.
-
bp-90c80 new set up check connection between main unit and lct
setting up a new machine and I'm getting a message to check connection between main unit and the lct. thought firmware would fix the problem but it did... -
Paper misfeed even though tray is empty
Hi.
New guy here. Our small community has a Ricoh MP 4002.
Since we've had it, we manually select tray 1 whenever we are... -
Konica Minolta C558 LCT (PC-415) Paper not feeding straight.
Konica Minolta C558 LCT (PC-415) Paper not feeding straight.
Other trays are fine. Demo page is attached.
Kindly advise.... -
Bixhub 654e lct lit motor
Hi Folks-, would any one have these LCT lift , motor available, for sale?Konica c654E me with a part number,,? Thanks.
Jaime Perona
Stonington,... -
LCT 4030
Can anyone tell me how to disconnect the LCT 4030 from my 6502? I can see the bracket but can't get it disconnected?
Any help appreciate... -
Bizhub 458
Hi everyone. I have a customer with a Bizhub 458 with a LCT large capacity tray 3. Every time the machine feeds out of tray 3 we either get a wrong paper... -
Toshiba 456 tray 1 and 2 jams
Paper jam Letter-R from tray 1 and 2 when the paper reach the fuser. The registration of the print on the paper is in the correct position.
Install... -
JAM 027 in ricoh pro 8120s, help!!
Good day, as the title says I have a new problem with this machine and I am starting to think that it was not a good choice, the printer can print 10k... -
eStudio 457 - EB50
Strange issue going on:
Our tech was working on an e457 (less than 100k prints on it). We keep getting an EB50 jam code but ONLY on duplex... -
Ricoh Pro C5100S LCT
i have ricoh pro c 5100s without external fiery
i downloaded and install fiery print driver but LCT not present
any ideas please... -
MP7502 LCT not finishing the supply
THe LCT Drawer on this 7502 has stopped running the peper all the way out, it starts jamming at about a quarter inch left to go, we refill it, then it... -
bizhub large capacity tray paper skewing...
a word to the wise
if you are getting paper skewing from the large capacity tray...
both drawers...
check the paper path door on... -
Rt 43 compatibility
Hi All, I hope your day is going well. I am getting ready for an install of several of the 03 series machines. I have been using the trusty old RT43 LCT... -
Ricoh Pro C 751 'slow printing'
Hi,
After we send a file to print, Fiery e41 process it and it took a 5 mins to print on the machine.
It happens from LCT and on heavyweight... -
Konica pro951 no tray 3 after c-a101
Started with a C-A 101 code start up error.
rebooted and now tray 3 lct not showing up.
tried PCRB.
OACB ?
LCT BOARD...
