digicor
digicor
Service Manager
Last Activity: 11 hours ago
Joined: 07-21-2008
Location: tampa Florida
-
i agree in cleaning the optics, but to have to disassemble the optic unit to clean this one little mirror is not normal, and the smudge on it and where... -
ok...I changes the entire doc feeder...no better
I changed the optics unit... worse...so upon re installing the original optics unit I notice bad...Leave a comment:
-
5801 is memory all clear... we don't mess with that...
is there a scanner all clear?...Leave a comment:
-
I dont have a 4-801 on mp c6004Leave a comment:
-
where 801? sp4?...Leave a comment:
-
mp305 fax report image to small
is there a way to enlarge the fax report sent with image, image to be larger than this, ... -
im changing the doc feeder, and or the optics tomorrow, nothing worked, except in copy mode i lightened up the density all the way and the blue shading...Leave a comment:
-
any other ideas?Leave a comment:
-
found it thank youLeave a comment:
-
grey balance setting in the scanner service mode? or where? sorry to ask, im not Infront of a machine at the momentLeave a comment:
-
any other ideas?Leave a comment:
-
here is samples...Leave a comment:
-
MP C6004 Scanning with blue haze
i have a MP C6004 thats scanning and copying with a blue haze all over it, not sure why, it was scanning clean for the last 2 months after installed......Last edited by digicor; 1 week ago.
No activity results to display
Leave a comment: