Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    nairobi
    Posts
    221
    Rep Power
    0

    SC 995-01 MP5002

    HELLO TO ALL!

    i replaced a controller board after the icons for the print/scan dissappered,put back the old nvrams in vain,went a step further and replaced the bcu and iob boards,I'm confused as the manual says its a bcu/nvram issue,please help i will really appreciate

    SC 995-01

    • Defective BCU

    • NVRAM Replacement error


    1. Install the previous NVRAM.
    2. Input the serial number with SP5811-003, and turn the main power switch off/on.



  2. #2
    Senior Tech 100+ Posts
    Join Date
    Feb 2011
    Posts
    147
    Rep Power
    15
    995 is a serial mismatch error, there are three areas where the serial is stored on this device and you need to check all three match up.
    I think you may habe to go into special sp to input.
    The novita one, as far as I am aware cant be adjusted.
    Good luck.


  3. #3
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    nairobi
    Posts
    221
    Rep Power
    0

    Re: SC 995-01 MP5002

    Quote Originally Posted by johnyb View Post
    995 is a serial mismatch error, there are three areas where the serial is stored on this device and you need to check all three match up.
    I think you may habe to go into special sp to input.
    The novita one, as far as I am aware cant be adjusted.
    Good luck.
    thanks johny,

    i have inputed the serial how do u get to ssp as the manual has a level 3
    5811 MachineSerial
    002 Display Displays the machine serial number.
    003 BCU Inputs the serial number.
    005 FRAM Displays the FRAM serial number.



  4. #4
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    nairobi
    Posts
    221
    Rep Power
    0

    Re: SC 995-01 MP5002

    any more ideas


  5. #5
    Glorified Parts Swapper 100+ Posts ptrflrs's Avatar
    Join Date
    Dec 2010
    Location
    San Antonio
    Posts
    192
    Rep Power
    19

    Re: SC 995-01 MP5002

    access special sp mode by holding down [#] key then hit Copy sp on the screen. does it have postscript sd card? try it with it out.

    jesus loves you! (everyone else thinks you're an assh*le)
    street cred: CompTIA A+ & Network+ Certified; Konica Minolta Gold Seal x2,
    Konica Minolta Outward ASSociate, Ricoh, Sharp, Lexmark trained

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Feb 2011
    Posts
    147
    Rep Power
    15
    pm sent


  7. #7
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    nairobi
    Posts
    221
    Rep Power
    0

    Re: SC 995-01 MP5002

    Quote Originally Posted by ptrflrs View Post
    access special sp mode by holding down [#] key then hit Copy sp on the screen. does it have postscript sd card? try it with it out.
    thanks for the input,but still cannot access SP 5811-5 FRAM to check the serial no. is this the novita?


  8. #8
    Glorified Parts Swapper 100+ Posts ptrflrs's Avatar
    Join Date
    Dec 2010
    Location
    San Antonio
    Posts
    192
    Rep Power
    19

    Re: SC 995-01 MP5002

    Quote Originally Posted by katash View Post
    thanks for the input,but still cannot access SP 5811-5 FRAM to check the serial no. is this the novita?
    u mean nvram? FRAM might be "fixed ram" but not sure.

    jesus loves you! (everyone else thinks you're an assh*le)
    street cred: CompTIA A+ & Network+ Certified; Konica Minolta Gold Seal x2,
    Konica Minolta Outward ASSociate, Ricoh, Sharp, Lexmark trained

  9. #9
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    nairobi
    Posts
    221
    Rep Power
    0

    Re: SC 995-01 MP5002

    Quote Originally Posted by ptrflrs View Post
    u mean nvram? FRAM might be "fixed ram" but not sure.
    me too not sure i've even replaced the nvram from another new mcn and input serial no. but to no avail,in a dilemma!


  10. #10
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    nairobi
    Posts
    221
    Rep Power
    0

    Re: SC 995-01 MP5002

    DONE!!!

    just realised you have to replace both eeprom and nvram at the same time and input serial no.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here