Ricoh 220 internal tray1 full

[cosmic18]

Hi guys please can anyone help me this old copier has locked out showing
internal tray 1 full remove paper there is no paper there i cannot go into
users tools please help

[Ricohlovers]

Hi.

very common error, exit actuator for Internal tray. Pulled out the Lever (11) from PAPER EXIT.
The paper overflow detection sensor [A] is located at the paper exit section of the fusing unit. When this sensor is activated, the machine detects that the paper stack height exceeded a certain limit and stops printing.

Regards.

[Vulkor]

If pulling the lever down to the proper position doesn't work Then the Paper Sensor arm has been pulled/knocked off its perch so to say. That requires removing the cover to that fusing unit. Front of machine. Small area. One Screw.

[cosmic18]

Thanxs very much for your help,the exit atcurator was dislodged i have not come across this fault before
cheers

[Vulkor]

Happens when tray gets full/or someone is rough...