Firmware killed my machine samsung scx-6345n dead main board firmware

[sagar4]

Good afternoon all. I have an samsung scx-6345n that I just updated the firmware now it does not want to come on. My question is from what I read in other posts is I upgraded the firmware to high of a jump from previous version which in turn can make the main pwb bad. Now if I replace the main pwb part# Jc92 01690B is the firmware on there already or do I have to do the firmware all over again. Thanks

[Tonerbomb]

Re: Firmware killed my machine samsung scx-6345n dead main board firmware

Good afternoon all. I have an samsung scx-6345n that I just updated the firmware now it does not want to come on. My question is from what I read in other posts is I upgraded the firmware to high of a jump from previous version which in turn can make the main pwb bad. Now if I replace the main pwb part# Jc92 01690B is the firmware on there already or do I have to do the firmware all over again. Thanks

There will be frimwar on the new board, what version you won't know until the machine boots and goes ready. So you may still have to do frimwar updates.............

Hopefully you haven't killed the MSOK chip........... if you have it's done.............

[Chrisrayburn]

Re: Firmware killed my machine samsung scx-6345n dead main board firmware

Release Note.txt
read this before updating the 6345 firmware