14 results in 0.0081 seconds.
-
Firmware killed my machine samsung scx-6345n dead main board firmware
Good afternoon all. I have an samsung scx-6345n that I just updated the firmware now it does not want to come on. My question is from what I read in other... -
SCX- 6345 joint pcb
I have been on the phone with Samsung trying to get the part # for the joint pcb board and they could not find it. This pcb is the one that is mounted... -
samsung scx 6345 no power
I have a samsung scx 6345 that will not power up, it as power coming in, red light on main board comes on but nothing else. -
printerguy1989
I have a samsung scx 6345n that is printing lightly. Is there a toner sensor that needs replaced? -
Samsung scx-6345 hdd format and partition information
does anyone have the Samsung scx-6345 hdd format and partition information? thanks in advance. -
Samsung SCX 6345 Toner Suppl Error
Customer Put in new Toner and 1 day later got the Toner Supply Error message
This is a Factory Cartridge.......
Tried another... -
samsung 6345 main board replacement
How do I input the machine serial number after replacing a new MCB on the samsung 6345. Do I need to take any precautions before proceeding with the main... -
Samsung scx-6345n registration jam
I have an intermittant registration jam, I did the output test to see if it was the registration sensor, and it wasn't activating correctly, so I swap... -
WorkCentre 4250
Hi, everybody! Who knows, Xerox WorkCentre 4250 has any Samsung analog? -
Samsung SCX 6345
Just wondering what you samsung dealers think about the way the software is updated on the SCX 6345. Has it been a hassle or easy to do. Thanks -
samsung 6345 jamming
I am working on a samsung 6345 and i'm not familiar with these at all... the lead edge goes just beyond the fuser and it stops every time... all...
-
Samsung 6345 duplex issues
I have a 6345 that out of the blue will not duplex at all. When 2-2 is selected the machine will put each side on a seperate sheet. (as if 2 page seperation... -
samsunf 6345 distorted image
just got out first sammy 6345. after unbox and set up noticed distorted copy. does it from internal prints aswell from doc. checked with our wholesaler... -
Sam 6345 low fuser error
Has anyone run into this on their machines? I replaced fuser 3 weeks ago, but now its back. My supplier says I'm the only one thats had this proble...
