Hey all, I have seen this issue a few times as these machines age. Hopefully the attached bulletin will save someone a few parts...and a few grey hairs.
-
Failing to plan is planning to fail!!! -
Re: Virgo (4111-5141) Web Stalls
We had lots of problems with noise and web stalling with the mx4141/5141
Found out after a few interventions, that the new fusers we had placed during maintenance started stalling.
Problem was with the fusers themselves, not the machine.
After bending a little axle from the webcleaning gears, noise and stalling went away.
These were brand new fusers btw, and we only had the problem with the MX511FU.
Probably manufacturing errors. -
Re: Virgo (4111-5141) Web Stalls
If you try to move the webcleaning by hand, and this doestn work, means that the fuser isnt right.
If you try this on a fuser that is correctly manufactured, you can move the webcleaning fairly easy...Comment
-
Re: Virgo (4111-5141) Web Stalls
sharp knows of this issue both the ones from NPC and sales has this problem.Comment
Comment