Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Repair God? not quite 100+ Posts fireater's Avatar
    Join Date
    Apr 2006
    Location
    Winnipeg
    Posts
    197
    Rep Power
    29

    New sharp colors/ mx3070 / 3071 etc

    Hey guys .. any thoughts on the fuser in these things?


    the lack of web is still an issue in my mind.
    BUT some do work . others do not. Yes I've done the sharp bulletins.
    Sharp Canada told us that the machines shipped to them before product launch had webs.
    I was wondering if anywhere else in the world they still had webs and if so can i get the parts list of cleaning unit to add it to my machines?
    I fix copiers ...Well Sorta

  2. #2
    Trusted Tech 50+ Posts
    New sharp colors/  mx3070 / 3071 etc


    Join Date
    Oct 2016
    Location
    Grand Island, NE
    Posts
    66
    Rep Power
    6

    Re: New sharp colors/ mx3070 / 3071 etc

    I haven't heard anything about Sharp adding web units to these fusers. It's a shame, really. The machine's aren't that bad, but the fusers just suck. I have very few that make it to a PM cycle, and I have well over a 100 that I service. If it only had a web, I believe they would last quite a bit longer.

  3. #3
    Repair God? not quite 100+ Posts fireater's Avatar
    Join Date
    Apr 2006
    Location
    Winnipeg
    Posts
    197
    Rep Power
    29

    Re: New sharp colors/ mx3070 / 3071 etc

    i know and the stuff to run the web is there on the 4070 series. just needs the gears and lever . i dont even care if there is firmware to make the web end sensor work. the web would last as long as the fuser thats all thats required
    I fix copiers ...Well Sorta

  4. #4
    Repair God? not quite 100+ Posts fireater's Avatar
    Join Date
    Apr 2006
    Location
    Winnipeg
    Posts
    197
    Rep Power
    29

    Re: New sharp colors/ mx3070 / 3071 etc

    is there any way we can put pressure in sharp usa? im from canada and they are too small to make this an issue
    I fix copiers ...Well Sorta

  5. #5
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,201
    Rep Power
    39

    Re: New sharp colors/ mx3070 / 3071 etc

    You would think that some of these mega dealers would have done that already. I was thinking of trying an oil roller from the AR610 series or the ARM550 fuser (2nd generation mod had an oil roller I think) but not sure if this would work and don't have any in stock to try.

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Jun 2011
    Posts
    76
    Rep Power
    17

    Re: New sharp colors/ mx3070 / 3071 etc

    The fusers are utter shite. Sharp have never made a decent fuser, apart from the Hercules, and that is a Ricoh fuser anyway

  7. #7
    Technician
    Join Date
    Dec 2008
    Location
    Toledo, Ohio
    Posts
    16
    Rep Power
    22

    Re: New sharp colors/ mx3070 / 3071 etc

    We have eliminated most of our fuser issues with these machines by running the fuser cleaning mode in system settings\image quality adjustment\fuser cleaning mode.
    I run the adjustment at every **70/**71 service call, if the fuser is real bad you may have to run the adjustment a lot (40/50 times). I've brought fusers back to life that i originally though were dead just by running the cleaning.

  8. #8
    Junior Member
    Join Date
    Nov 2017
    Posts
    4
    Rep Power
    0

    Re: New sharp colors/ mx3070 / 3071 etc

    The fuser cleaning mode definitely helps. What also helps is going to simulation 43-1 and put the "plain pap&wup&rdy GR" on -5

  9. #9
    Trusted Tech 50+ Posts
    New sharp colors/  mx3070 / 3071 etc


    Join Date
    Nov 2005
    Posts
    80
    Rep Power
    28

    Re: New sharp colors/ mx3070 / 3071 etc

    Using the 607 kits instead of the 407s to rebuild the 30 - 40 ppm fusers helps a bit as well.

    We tried it on a couple, half-expecting warmup related codes, but haven't encountered any thus far.

  10. #10
    Repair God? not quite 100+ Posts fireater's Avatar
    Join Date
    Apr 2006
    Location
    Winnipeg
    Posts
    197
    Rep Power
    29

    Re: New sharp colors/ mx3070 / 3071 etc

    Quote Originally Posted by pbbsinc View Post
    Using the 607 kits instead of the 407s to rebuild the 30 - 40 ppm fusers helps a bit as well.

    We tried it on a couple, half-expecting warmup related codes, but haven't encountered any thus far.
    did you mean the 608 kits?
    my manual says fuser kits are
    mx607fb
    mx607lh

    but the mx607fb has been superceded by the mx608fb

    but issues are still occurring.. mainly buildup on the separation plate. and lower heat roller contamination
    I fix copiers ...Well Sorta

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here