Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Apr 2017
    Location
    Vicksburg
    Posts
    8
    Post Thanks / Like
    Rep Power
    0

    7545 Professional Booklet Maker Not Detected

    I just bought a new (refurbished) 7545. I had an existing booklet maker. I attached everything and started the machine. The booklet maker didn't come up on the Centreware HTML page, so I updated the firmware. Same thing. The machine uses the finisher's trays and it will staple if I tell it to when copying. But it will not recognize the booklet maker/finisher for me to install a driver for it.

    The Centreware page only shows the copier.

    What do I need to do to get the machine to recognize the prof. finisher/ booklet maker?


  2. #2
    Technician
    Join Date
    Jul 2014
    Posts
    32
    Post Thanks / Like
    Rep Power
    7

    Re: 7545 Professional Booklet Maker Not Detected

    Not sure why its not showing in cwis. But make sure in the driver configuration tab that the proper accessories are installed. (normally turn bi-directional setup on will do it)


  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jun 2013
    Location
    VA
    Posts
    168
    Post Thanks / Like
    Rep Power
    12

    Re: 7545 Professional Booklet Maker Not Detected

    Booklet maker may not be plugged in or has loosened upon delivery. When you print out the Configuration sheet does it show up there under finisher? Firmware is not gonna fix this error. I recommend to not download firmware unless it specfically addresses an issue you are having at hand. Open finisher and remove the booklet staples and see if the machine recognizes they are not in. If removed and screen does not ask to install then you have a comm issue between Booklet maker board and finisher board. Check error codes in fault history for numbers or check in diags for description.

    Hope this helps


  4. #4
    Junior Member
    Join Date
    Apr 2017
    Location
    Vicksburg
    Posts
    8
    Post Thanks / Like
    Rep Power
    0

    Re: 7545 Professional Booklet Maker Not Detected

    Thank for the advice, but I actually resolved this one. It turns out there was a more recent firmware just for the 7545 and 7556. Installed it and it solved all of my problems. Well most. Folding and stapling were off-center, but went into the CSE and adjusted so I'm good now.

    On another note, does anyone know how to delete posts?


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here