Important Support Notes
5.0/5.1*and*5.55.0/5.1*and*5.5) for this release.
It is recommended that users revisit the download site for this document to check for updates periodically.
Review the SPP Contents Report on www.hp.com/go/spp/documentation to see which firmware components are*included in the SPP.
VMware vSphere 5.5 Update1, VMware vSphere 5.5, VMware vSphere 5.1 Update 2, and ESXi 5.0 Update 3 are the*VMware Releases that have been tested against this entire SPP.
VMware ESX/ESXi 4.1 Update 3 and ESX/ESXi 4.1 Update 2 is supported only with the System ROM and iLO FW in this*SPP. The FW supported on VMWareESX/ ESXi 4.x is from the Service Pack for Proliant (SPP) 2012.03.0 (B) and the device*drivers listed are included in the VMware base image available on VMware.com or the HP Custom Image available on*hp.com at: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productN....
Please note that this recipe lists some servers and HW that support one or more of the VMware ESXi and vSphere OS*releases covered by this recipe. For a complete reference on which HP Proliant Server models support which version of*VMware OS, you can access the HP Server Support Matrix for ProLiant from the*HP website here. This recipe should be*used in conjunction with the HP Server Support Matrix to build a supported HW and SW configuration.
A new version of this recipe will be published when a new HP Service Pack for ProLiant (SPP) is published, when VMware*publishes a new OS Release (e.g. 5.1) or when VMware publishes a new update release (e.g. 5.1 U1).
Tags:
HP
More...