Starting all over again

[theengel]

Re: Starting all over again

What Brand of mailing equipment? I am an FP tech.. might be able to help with those manuals if needed

FP. I can't think of what FP means. Secrap, Buskro, Astrojet, Walco, KR, Xijet, etc., etc.,. Pretty much anything that comes our way. So far, the only thing I haven't been touching is the inserters.

[Lagonda]

Re: Starting all over again

Not good to hear...

Don't tell me you guys are moving to the manufacturer at the end of the alphabet.... ????

Moving around from dealer to dealer appears to be an on going trend at the moment.

I'm sure you'll do fine...

No, fortunately its not that far down the alphabet. All very hush hush at the moment so I can't name name.
However we've just unboxed a delivery of 20 small printers and 4 of them have crook screens. That doesn't bode well.

[NeoMatrix]

Re: Starting all over again

No, fortunately its not that far down the alphabet. All very hush hush at the moment so I can't name name.
However we've just unboxed a delivery of 20 small printers and 4 of them have crook screens. That doesn't bode well.

No good....

Hopefully not a sign of things to come.

In the end they're all just plastic boxes filled with what makes them go.

[theengel]

Re: Starting all over again

FP = Franko Postilia ... yeah I do the potage machines - folder/inserters - letter openers .. it's a german based company.. USA HQ is in MI.

Ok, most of what I'm working on is high production equipment.

[sturmtrooper]

Re: Starting all over again

I got one of those rare backhanded complements from a customer the other day.

I had just re-assembled a hang-on finisher, and powered it up. The customer was sitting at an adjoining desk. When it began to run it made a very loud banging noise, probably because I had neglected to plug in the lower limit switch.

The customer said: "I was really impressed with your composure. You didn't even flinch when it started making those noises! You've been doing this a while."
Me: "It's not the loudest noise I've ever heard from a copier, and it didn't even try to remove any of my fingers. Nothing to get worked up about."

I once spent 30-45 minutes in a prison office trying to get the hot roller back in a MP2852 fuser. Finally I figured out you have to angle it just right to get it to slide all the way to the right to make it work. One of the office workers complimented my lack of swearing at it.