Bizhub c652 with fs-526 j72-11

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • scottlittle1988
    Junior Member
    • Oct 2013
    • 2

    #1

    Bizhub c652 with fs-526 j72-11

    Getting a J72-11 code with a FS-526, fitted the modified actuator and spring in the bridge unit, fresh paper etc, only really happens on A3. The paper will jam just after finisher entrance. any suggestions?
  • Aneurysm
    Administrator

    1,000+ Posts
    • Jan 2005
    • 1033

    #2
    Hi scottlittle1988, welcome to Copytechnet.com!
    "Remain calm. All is well." -Chip Diller, Nov 1963

    Comment

    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37251

      #3
      Re: Bizhub c652 with fs-526 j72-11

      Post your question to the proper technical forum if you expect help.

      Comment

      • bob marley
        Service Manager

        1,000+ Posts
        • Jan 2012
        • 1339

        #4
        Re: Bizhub c652 with fs-526 j72-11

        Originally posted by slimslob
        Post your question to the proper technical forum if you expect help.

        (http://www.copytechnet.com/forums/konica-minolta/ )
        Live for yourself and you will live in vain. Live for others, and you will live again

        Comment

        • scottlittle1988
          Junior Member
          • Oct 2013
          • 2

          #5
          Re: Bizhub c652 with fs-526 j72-11

          Originally posted by slimslob
          Post your question to the proper technical forum if you expect help.
          Ok no need to cry

          Comment

          Working...