Dead docucolor 250

[Matthew1876]

I have a dead docucolor 250 changed all main power boards and still no response any solutions

[Aneurysm]

Welcome to the site.

[bob marley]

Re: Dead docucolor 250

Welcome
if u need help post your question to the correct forum

[DheerajBE]

Re: Dead docucolor 250

Welcome
if u need help post your question to the correct forum

cross check power supply assembly, MCU board , MCU PWB , ESS board, ESS PWB.... if all good then try open all door of machines open remove all toner cartridges, pull out all drawer of machines keeping all doors ( left, right, front, toner cartridges, all trays ) open the try switching on machine

[ZammKV]

Re: Dead docucolor 250

Welcome to the Forum. Hope your thread had been solved.

[DheerajBE]

Re: Dead docucolor 250

Welcome to the Forum. Hope your thread had been solved.

cross check all boards and wiring if all is good and machine still not working then try one thing, open all the doors of machine remove all toner cartridge, open all trays (drum, ibt, transfer unit ie fuser drawer), all trays, left door, right door everything then switch on machine

[Phil B.]

Re: Dead docucolor 250

cross check all boards and wiring if all is good and machine still not working then try one thing, open all the doors of machine remove all toner cartridge, open all trays (drum, ibt, transfer unit ie fuser drawer), all trays, left door, right door everything then switch on machine

this is NEWBIE check in.. let him post his problem in the proper forum

[slimslob]

Re: Dead docucolor 250

cross check all boards and wiring if all is good and machine still not working then try one thing, open all the doors of machine remove all toner cartridge, open all trays (drum, ibt, transfer unit ie fuser drawer), all trays, left door, right door everything then switch on machine

Go away grave digger. This thread was three years dead and buried.