Hello team, I need help in timing the Minolta bizhub c360 finisher saddle staple cartridge sockets. I removed both staple cartridges from the finisher and restarted the machine. Then the machine brings this message replace the staple 1 and 2 cartridges. I feel I try to install them it seems like the sockets are locked or have changed their length inside where we fit in the cartridges. Please help.
-
-
Welcome to the site."Remain calm. All is well." -Chip Diller, Nov 1963 -
Welcome to Copytechnet.com, the best Copier, Printer, MFP tech site on the internet!"Remain calm. All is well." -Chip Diller, Nov 1963Comment
-
Welcome to the site."Remain calm. All is well." -Chip Diller, Nov 1963Comment
-
Hi amunthali, welcome to Copytechnet.com!"Remain calm. All is well." -Chip Diller, Nov 1963Comment
-
Re: Minolta bizhub c360 saddle staple timing
Welcome
if u still need help post your question in the correct forum here ( http://www.copytechnet.com/forums/konica-minolta/ )Live for yourself and you will live in vain. Live for others, and you will live againComment
Comment