Kyocera M3655idn welcome screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • keith huntoon
    Junior Member
    • Jul 2020
    • 5

    Kyocera M3655idn welcome screen

    I have a Kyocera M3655idn.
    Screen stuck on welcome.
    Machine has USB ports blocked(Bank).
    Can not upgrade firmware thru USB port.
    Can not get into Simulation to clear memory and hard drive.
    No network connection.
    Thanks in advance.
  • tsbservice
    Field tech

    Site Contributor
    5,000+ Posts
    • May 2007
    • 7635

    #2
    Re: Kyocera M3655idn welcome screen

    Wrong forum.
    Post here:

    Good luck
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    Comment

    • Phil B.
      Field Supervisor

      10,000+ Posts
      • Jul 2016
      • 22808

      #3
      Re: Kyocera M3655idn welcome screen

      Originally posted by tsbservice
      and he posted in both now.

      what do newbies not understand about Check in tell us about you?

      Comment

      • tsbservice
        Field tech

        Site Contributor
        5,000+ Posts
        • May 2007
        • 7635

        #4
        Re: Kyocera M3655idn welcome screen

        Author just copy-pasted his thread in right forum after my post.
        Nothing wrong here Phil. If mods were available normally someone just would move his thread to the right place but we have only Aneurysm... so let it be Brother.
        A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
        Blessed are they who can laugh at themselves, for they shall never cease to be amused.

        Comment

        • Phil B.
          Field Supervisor

          10,000+ Posts
          • Jul 2016
          • 22808

          #5
          Re: Kyocera M3655idn welcome screen

          Originally posted by tsbservice
          Author just copy-pasted his thread in right forum after my post.
          Nothing wrong here Phil. If mods were available normally someone just would move his thread to the right place but we have only Aneurysm... so let it be Brother.
          Not pressing the issue brother..
          I noticed he posted in other/proper forum after you mentioned it.
          Also noted that this is basically a newbie issue.. hopefully instructing other newbies ..


          Sent from my SM-G960U using Tapatalk

          Comment

          Working...