Hey everyone

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cviescas
    • May 2025

    #1

    Hey everyone

    Hey all! Looking around to see if there was another area and found a greeter!

    I have an ir3570 that is refusing to print (Has never printed - only copied). Scans fine, copies fine, has no license key though.. and I am told that is an issue.

    Anyone know anything about that, or why it might not print?


    Thanks in advance !
    C
  • SCREWTAPE
    East Coast Imaging

    Site Contributor
    2,500+ Posts
    • Jan 2009
    • 3396

    #2
    You need a printer kit. The UFR II Printer Kit-E3
    This machine does not require LMS.

    Comment

    • cviescas

      #3
      ah.. k.. xlnt. Thats an expensive little beast.

      Know where I might find one under $500 ?

      C

      Comment

      • SCREWTAPE
        East Coast Imaging

        Site Contributor
        2,500+ Posts
        • Jan 2009
        • 3396

        #4
        Try searching.

        Comment

        • cviescas

          #5
          I asked.. because I have been ,. but im not seeing anything under $750

          c

          Comment

          • SCREWTAPE
            East Coast Imaging

            Site Contributor
            2,500+ Posts
            • Jan 2009
            • 3396

            #6
            That might be the best option.

            Its worth it.

            Comment

            • cviescas

              #7
              aye.. could be

              Thanks for the help

              Charles...

              Comment

              • SCREWTAPE
                East Coast Imaging

                Site Contributor
                2,500+ Posts
                • Jan 2009
                • 3396

                #8
                Good luck.

                Comment

                • Gunawan
                  Junior Member
                  • Sep 2010
                  • 8

                  #9
                  new bie

                  hi all, I am a newcomer, I hope to increase knowledge and experience in this forum.
                  thank you ...

                  Comment

                  • SCREWTAPE
                    East Coast Imaging

                    Site Contributor
                    2,500+ Posts
                    • Jan 2009
                    • 3396

                    #10
                    Welcome.
                    Read the rules.

                    Comment

                    Working...