How to enable printing in CANON IRC 5180 without IMAGEPASS-H1 CONTROLLER

[digitalbrain]

Is it possible to enable direct printing in IRC 5180 which is presently connected to H1 controller ? I have tried connecting directly by changing setting in option/body/interface from 3 to 0 and set the network settings and installed the PCL5c driver. The pinging is ok but the print does not come.

I want to do this because at times the H1 does not work and shows FF in display.

I am told that we have to attach a UFR board inside to enable internal printing. If it so how check whether UFR board is present or not ?

Also what is reason for FF display in the H1 controller

This is my first experience with this model can some body clarify ??

Thanks in advance

DB

[TheMaskman]

I have tried connecting directly by changing setting in option/body/interface from 3 to 0 and set the network settings and installed the PCL5c driver. The pinging is ok but the print does not come.