I purchased estudio 35. Worked for an hour and melting smell was experienced. Switched off the machine, restarted after 2hrs and error code c47 was shown. Tried to use 0-8, 400-0 but not cleared. In the second attempt the start key failed to work while on test mode (resetting the error). Removed the BOARD on top of the hdd and found one ac blown out, replaced it.The error code was erased but C41 came up instead. Failed to clear, removed the board where the main power input originates, replaced the power supply too,again the board on top of the hdd blew and now the machine does'nt start. Please help in resolving this.
I also reliased that the fuser unit (heater/pressure roller dont get hot at all!)
I also reliased that the fuser unit (heater/pressure roller dont get hot at all!)
Comment