KM C8000ERROR CODE C2740

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • adliali

    #1

    KM C8000ERROR CODE C2740

    Good mornig
    i recive error code c-2740 konica minolta c8000
  • Aneurysm
    Administrator

    1,000+ Posts
    • Jan 2005
    • 1033

    #2
    Welcome to Copytechnet.com, we look forward to your participation.
    "Remain calm. All is well." -Chip Diller, Nov 1963

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: KM C8000ERROR CODE C2740

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      • brecht2
        Technician

        50+ Posts
        • Feb 2012
        • 71

        #4
        Re: KM C8000ERROR CODE C2740

        Hello,

        I got the same code on an FS-C2126MFP.

        Info manual:
        C2740
        Developing release motor time-out error
        When the developing release
        motor is driven, the developing
        release switch (DEVRSW)
        is not detectable for 1 s.
        Defective connector
        cable or poor
        contact in the connector.
        Reinsert the connector. Also check for continuity
        within the connector cable. If none,
        replace the cable.
        Developing release motor and engine PWB
        (YC35)
        Defective drive
        transmission system
        of the developing
        release motor.
        Check if the rollers and gears rotate
        smoothly. If not, grease the bushes and
        gears. Check for broken gears and replace if
        any.
        Defective developing
        release motor.
        Replace the developing release motor.
        Defective engine
        PWB.
        Replace the engine PWB and check for correct
        operation (see page 1-5-26).

        Comment

        • DWise
          Senior Tech

          500+ Posts
          • Apr 2010
          • 895

          #5
          Re: KM C8000ERROR CODE C2740

          Originally posted by adliali
          Good mornig
          i recive error code c-2740 konica minolta c8000
          First off, welcome to CTN!!

          Secondly, post this in the correct forum for better chances of getting assistance.

          Lastly, have you tried to do anything to resolve the issue yet? Or are you looking for a freebie? (I know the answer already...)
          Do for one what you wished you could do for everyone. - Andy Stanley

          Comment

          Working...