copierseattle

[Guest]

I am not a copier expert. I am the owner of a growing construction business and with a couple of office locations I have started to see all the issues copers have at times. I am also an engineer, so I like to fix everything myself (I try at least).

[copyseattle]

Bizhub 282

I don't really know how this forum works yet, but I will just post my question here and hopefully someone who can help will be able to see it.

My office has a bizhub 282 with the FS530 finisher installed. The machine worked fine until one day we had a saddle unit installed. After the saddle unit was installed, the machine worked for about one day and overnight it stopped working.

It now gives the message that the section indicated by arrow is open, referring to the finisher lid. I had 2 technicians come out and no one seems to know what is going on. They talk about the PWB board being bad, but cannot say for sure.

I am wondering if any of you experienced this problem before and if you have any insights as to what may be the problem. All switches have been checked, the finishing unit is brand new (I bought a new one in the box after the problem started, but it didn't solve the problem).

If it is indeed the PWB board, can that be replaced for a used unit? if so will the firmware need to be reinstalled?

I hope someone here can help me out.

THanks!

[slimslob]

Re: copierseattle

Glad to have you join us. Not everyone looks at the Newbie Check In forum. Post your question to the Konica Minolta forum in Copier Technical Discussions and you will get a lot more Bizhub tech see it. You will probably at some time need to contact Paul@JustManuals.com for service and parts manuals.

[livewire]

Re: copierseattle

Hi copyseattle, Welcome!

[Debs1964]

Re: copierseattle

Welcome

[HenryT2]

Re: copierseattle

Welcome ........

[DWise]

Re: copierseattle

Welcome to CTN!!