I've been in the copier business in Dallas/Fort Worth for 26 + years. I specialize in Ricoh copiers and would be more than glad to help in anyway I can. I currently have a Konica Minolta C452 where the 3rd tray is not recognized. On the copier screen it shows tray 1, 2, 4--the area where 3 should be is blank. Any suggestions?
-
-
Thanks for joining our site, we look forward to seeing more posts from you in the future."Remain calm. All is well." -Chip Diller, Nov 1963 -
It got disabled probably because of paper caught behind it. A reboot sometimes works if not you will need to do a trouble resetComment
-
Re: Konica/Minolta C452
Glad to have you join us.
Post your question in the Konica/Minolta copier forum. It will be seen by a lot more K/M techs there.Comment
-
Re: Konica/Minolta C452
Remove paper behind tray, reboot copier.Color is not 4 times harder... it's 65,000 times harder.
They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.Comment
-
Re: Konica/Minolta C452
Yep, just had yesterday one doing exactly that. Paper stuck behind the cassettes.
Hans“Sent from my Intel 80286 using MS-DOS 2.0”
Comment
-
Re: Konica/Minolta C452
Welcome
There are 10 types of people in this world, those who understand binary maths and those who don'tComment
-
Re: Konica/Minolta C452
Welcome to CTN!!Do for one what you wished you could do for everyone. - Andy StanleyComment
Comment