If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
ZAZA your question is not so simple $10 to $30 per hour is a range of pay in the USA. Skill level and ability determines the hourly wage. If your just a copier tech it's on the lower side of the scale, if you have network skills or solution product skills it's on the higher side and managment even higher. I don't always take years of experiance as a gage of ability.
Good ..the CANON ..and HP is the most brand of machine in usa ..so my second question what do think ...the technician worked in her liberal workshop's ...or he worked in any authrized dealer ...what better ..I mean the advantage of saving money! and how much ?
He was telling you that the most equipment and jobs are located on the east and west coast. The middle of America has less population. Lots of farmland.
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
Comment