Rexel 2070

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dickierock
    Trusted Tech

    Site Contributor
    250+ Posts
    • Jan 2010
    • 252
    #1

    Rexel 2070

    Can anyone with Rexel experience shed light on this error..
    Shredder is ready, paper feeds in a little bit, then "cutter oiling light" flickers and shredder cuts out.
    Paper stops feeding in. I think maybe jam detection issue, but would like further input.
    Thanks in advance.
    Tags: feeding, light, paper, rexel, shredder
    • Phil B.
      Field Supervisor

      10,000+ Posts
      • Jul 2016
      • 22808
      #2
      Re: Rexel 2070

      Originally posted by dickierock
      Can anyone with Rexel experience shed light on this error..
      Shredder is ready, paper feeds in a little bit, then "cutter oiling light" flickers and shredder cuts out.
      Paper stops feeding in. I think maybe jam detection issue, but would like further input.
      Thanks in advance.
      is the cutter gummed up?
      plenty of oil?
      feed wheels clean?

        Comment

        • dickierock
          Trusted Tech

          Site Contributor
          250+ Posts
          • Jan 2010
          • 252
          #3
          Re: Rexel 2070

          Originally posted by Phil B.
          is the cutter gummed up?
          plenty of oil?
          feed wheels clean?
          Hey Phil,
          Yeah plenty of oil,,
          cutters are clean and turning well by hand.
          Any other ideas?
          Cheers.

            Comment

            Previous template Next
            Working...