-
-
Re: IC305 with FACI kit dont run after several years
Upgrade 1
VideoCard(Copyer connector card) was changed, didnt help.
I ordered new Harddisk and will change also the memory chips on monday morning.
Also ordered a rent-controler from KM, to have the customer satisfied.
This will be an expensive fun, customer has a full-service from us.
I tell you monday more.
greetings peter -
upgrade 2 IC305 with FACI kit dont run after several years
That bastard will not work with me.
I changed HD and video card, memory and power supply.
I changed back to system soft 2.1 and it goes until "check copier power and cable".
Then it tooks 30 seconds and the controller shuts down itself.
I have no hint anymore.
Hope, the rent-fiery will run....Comment
-
Re: IC305 with FACI kit dont run after several years
So, in the end we send Fiery to Serviceheadquarter KM and they changed Motherboard, HD and Powersupply.
Motherboard was not availliable for me to fix, there are some Eprom features in it, that stores options-Information.
Service manual doesnt tell exactly the correct way to change it without loosing options information.
And for the friend, that ask me for System soft, yes the Minolta-Fiery works with the IKON-Machine fine.
Our price for the re-installation was about near 2000 Euros, next time i get a used one on Ebay.
Now the rental-fiery is back to KM, the customers-fiery is already working, anything is fine.
But after over 20 Years of servicing Fiery hard.- and software i had a bad feeling at this.
This was the first time i had to give up.
Thats for your info, ticket closed.
grettings peterComment
Comment