Greetings All
The Company I work for just became an independent Xerox dealer and now have a band new C60 in our demo room with a fiery attached. However, like always before we can squeeze in time to play with the machine, it was sold and now scrambling to figure out the interface to the machine work.
We got the fiery setup ok, but I can't get to the Xerox controller web interface. I worked with Canon a while back and to get to the canon interface from the fiery, there was a button in the fiery interface the connected you to the internal canon interface. No such luck for the Xerox. From the interface, I can only get to fiery service and config stuff (or am I missing something?).
From the config page I printed from the Xerox internal controller, I get an IP address of 100.100.100.101 but can't connect to it. I have ping our gateway from the Xerox internal controller using the control panel and got a successful reply, so I know that pass-though is working.
question is, how can I get to the Xerox controllers web interface to setup email setting and enter scanning addresses?
Thanks in advance
The Company I work for just became an independent Xerox dealer and now have a band new C60 in our demo room with a fiery attached. However, like always before we can squeeze in time to play with the machine, it was sold and now scrambling to figure out the interface to the machine work.
We got the fiery setup ok, but I can't get to the Xerox controller web interface. I worked with Canon a while back and to get to the canon interface from the fiery, there was a button in the fiery interface the connected you to the internal canon interface. No such luck for the Xerox. From the interface, I can only get to fiery service and config stuff (or am I missing something?).
From the config page I printed from the Xerox internal controller, I get an IP address of 100.100.100.101 but can't connect to it. I have ping our gateway from the Xerox internal controller using the control panel and got a successful reply, so I know that pass-though is working.
question is, how can I get to the Xerox controllers web interface to setup email setting and enter scanning addresses?
Thanks in advance
Comment