ricoh does not care about drivers to print on mac

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • medallo
    Technician
    • Dec 2008
    • 21

    #16
    Re: ricoh does not care about drivers to print on mac

    Where can I get sd postscript aficio2075 and mp8000?


    problem print pxlmono Ricoh mp8000 - Apple Community

    Comment

    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37460

      #17
      Re: ricoh does not care about drivers to print on mac

      Originally posted by medallo
      Where can I get sd postscript aficio2075 and mp8000?


      problem print pxlmono Ricoh mp8000 - Apple Community
      You cannot. They do not take the same SD card type.

      Comment

      • KenB
        Geek Extraordinaire

        2,500+ Posts
        • Dec 2007
        • 3944

        #18
        Re: ricoh does not care about drivers to print on mac

        Originally posted by slimslob
        You cannot. They do not take the same SD card type.
        Either would be a real trick to find.
        Both of these models are SUPER old.
        “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

        Comment

        • margic brian
          Technician
          • Jul 2012
          • 97

          #19
          Re: ricoh does not care about drivers to print on mac

          Originally posted by slimslob
          MAC does have a built in Generic PCL Driver that does work with Ricoh. It does not allow setting options.
          surely Generic drivers work but wont print color. seen cases with mpc 2011.

          Comment

          • Codex
            Senior Tech

            500+ Posts
            • May 2008
            • 701

            #20
            Re: ricoh does not care about drivers to print on mac

            i have the same problem with some macs, the color machines don't print in color.....but only B/N
            Memento Audere Semper

            Comment

            Working...