Fiery Password Retrieval Tool

[dtxerox1212]

I Got the Same MD5 Hash #

Any other ways, my case I dont have the software to reload
this is a Xerox DC 240 with embedded Fiery
thanks alot for any help

[dtxerox1212]

Solution for MD5 Hash

If you using the file "password.ps" and are getting a MD5 Hash Number too big for a 8.5x11 page,do the following
use the file attached and proceed with the same instructions on the initial post, (I edit the file attached with a smaller font this way you will get all 32 characters on the MD5 Hash) than go the web site MD5 Decrypter.com, MD5 Decryption, Free MD5 Decrypter, Security, MD5 Hash, MD5 Security.
and input your MD5 Hash,,,, and like magic your admin password will appear
good luck to all.....

PS: if you are able to read all 32 characters with the original file, you don't need to download my file (my file has a 10 point size font, original file has a 20 point size) in my case I was not able to get all characters.

[Viperone]

If you using the file "password.ps" and are getting a MD5 Hash Number too big for a 8.5x11 page,do the following
use the file attached and proceed with the same instructions on the initial post, (I edit the file attached with a smaller font this way you will get all 32 characters on the MD5 Hash) than go the web site MD5 Decrypter.com, MD5 Decryption, Free MD5 Decrypter, Security, MD5 Hash, MD5 Security.
and input your MD5 Hash,,,, and like magic your admin password will appear
good luck to all.....

PS: if you are able to read all 32 characters with the original file, you don't need to download my file (my file has a 10 point size font, original file has a 20 point size) in my case I was not able to get all characters.

I used Command Workstation for sending the script to the printer and thanx to that I was able to shrink the text so the MD5 fitted in on page.
I was looking for decrypting sites but non of them contained my password untill you posted the link.

Thanx for all. It's a big help.

[dtxerox1212]

Great

I used Command Workstation for sending the script to the printer and thanx to that I was able to shrink the text so the MD5 fitted in on page.
I was looking for decrypting sites but non of them contained my password untill you posted the link.

Thanx for all. It's a big help.

With the original file the font is just too big for the 32 characters of the MD5
to show on the letter size paper, great I'm happy it work for you too....this is just a great tool....

[Albert]

Really works and easy to use

[copierpro]

password retreival

what are step by step I don't understand how to do this with command workstation - CWS on a remote PC then send to ip fo C1 using direct queue? Is that right?

[copierpro]

In other words I need instructions on how to do this like I was an 8 year old.

[RRodgers]

In other words I need instructions on how to do this like I was an 8 year old.

Open Firefox (IE tends to be a problem with Fiery) and then put the IP of the FIERY into the address. (ie 192.169.1.200) or whatever your's is. You'll get a pop up, be sure to let the browser allow pop ups. Then choose downloader, then browse to the file that you want to upload (it's on your PC somewhere) select it, then BE SURE to select the DIRECT QUE (there are 3, direct, hold and print) Then click upload. The machine "might" print out a page that says the patch was applied. If not (and even if it doesn't) wait at LEAST 1 minute. And then tell the Fiery to reboot from the machine screen NOT FROM command workstation. When the Fiery comes back up and to ready, wait another minute and then reboot it again.

After that, you are good to go.

(crap... I just told you how to apply a patch... ummmm you can do all this.. ya just don't need the rebooting. ) Hey... I'm already working on my second rum and coke!! It's been a long week!!!

**edit**
the machine WILL print out a a page. JUST BE SURE that the paper is in the copier as PORTRAIT, NOT landscape. It prints toward the bottom... so in landscape it gets cut off.

I hope this helps you out. And if it does... I'm a rep whore... so bump my rep!! HAHAHAHHAAHHAAHHAAHAH

[copierpro]

thanks and

I will take a crossover from my edox to the Ethernet in to C1 leaving the crossover form copier to C1 as it is and give this a shot.

Let me know if my computer connections are wrong to C1 to get this file to print.

I appreciate your help!

[copierpro]

I set the network in My Network from obtain ip automatically to the address of the C1 which is 10.17.3.53; crossover cable from an edox we have in service to the Ethernet in at C1. Crrossover cable form copier to C1 still connected.

When I type the IP address of C1 10.17.3.53 in Firefox the WebTools milabox appears but not downloader or anything else for that matter - just the mailbox name of the previous owner.

If I leave obtain ip address auto on Edox in my network connections I got nothing when I type in the C1 IP address.

What am I doing wrong here?

[copierpro]

All I get when I open Firefox and type in the C1 IP address is the Fiery Web Tool mailbox page. ??

[burnzdog]

Hi All,

Can anyone help. I have tried to upload the password.ps file but nothing is coming out. Thats part of the problem im having tho, reason why im trying to connect to the fiery is because its not network printing. If i send a test page the pritn queue it appears as spooling and then disappears from the queue yet nothing is coming out.

Anyine got any ideas on this?

[RRodgers]

Hi All,

Can anyone help. I have tried to upload the password.ps file but nothing is coming out. Thats part of the problem im having tho, reason why im trying to connect to the fiery is because its not network printing. If i send a test page the pritn queue it appears as spooling and then disappears from the queue yet nothing is coming out.

Anyine got any ideas on this?

Is authentication turn "ON" on the copier?

[D_L_P]

Hi All,

Can anyone help. I have tried to upload the password.ps file but nothing is coming out. Thats part of the problem im having tho, reason why im trying to connect to the fiery is because its not network printing. If i send a test page the pritn queue it appears as spooling and then disappears from the queue yet nothing is coming out.

Anyine got any ideas on this?

You should be able to print out a Config sheet without the password. Depending on the model you can do it with the buttons on the front of the Fiery or from the control panel of the copier. Use that to check your settings. If you can't even get a config sheet and see "....Wait", the system software will need to be reloaded.

[burnzdog]

Thanks

Ive tried to print a config page via the copiers control panel but i cant find it? can you tell me where the option is please?