Scan to File Copystar 3035

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • elsteef
    Technician
    • Apr 2009
    • 17

    #1

    Scan to File Copystar 3035

    I have a customer that has asked me to setup scanning on their CS3035.

    The machine has the printer and scanner buttons to the left of the display. Does this mean the print/scan option is installed?
    If so, how do I go about configuring scan to file?

    I am not new to connectivity, but I am not familiar with the Copystar scan configuration.

    Your help is very much appreciated,
    Steve
  • Raymondd
    Service Manager

    100+ Posts
    • Jan 2008
    • 108

    #2
    The print/scan system are options. The buttons on the control panel are standard...

    Comment

    • scanman
      Technician
      • Feb 2009
      • 15

      #3
      On the right side at the rear, if you have 2 network RJ45s then the print scan is installed,

      Comment

      • elsteef
        Technician
        • Apr 2009
        • 17

        #4
        Next steps....

        This machine does have 2 network ports.

        What sort of scanning does this machine support? Email? SMB?

        Does it require any software to enable scanning?

        How do I get in to the settings to allow scanning configuration?

        Thanks again

        Comment

        • scanman
          Technician
          • Feb 2009
          • 15

          #5
          It will scan to network, scan to e-mail or you can use a twain driver and scan to an application. For scan to network you need a utility called (scanner file utility) and to set it up there is a utility called (address editor). You can download the address editor at Kyocera.com or copystar.com, I am not sure you can still download the scanner file utility. Check to see if there is a disk with the copier that may have these on them. You can also do set up thru a web browser. Let me know if you need the file utility and I can e-mail it to you.

          Comment

          • scanman
            Technician
            • Feb 2009
            • 15

            #6
            Also, to get into the scanner defaults at the copier itself, there is a black button to the right of the display that says defaults/counter. Press that button then touch scanner defaults, you must have a network connection to the scanner card or it won't let you in to the default settings. It will ask for a pin (6482) then you can get into the defaults for the scan system.

            Comment

            • geekor

              #7
              sorry to piggyback on this thread, but I was looking for some information and happened to stumble on it.

              Basically our main Multifunction went down, and with 1 1/2 months left on the lease, it is a waste of putting money back into it. We have a working CS3035 as a backup copier, but really could use the scanner function as well. Unfortunately, it does NOT have the network already attached and scanning is disabled. Is there a place to buy the Network interface card and get the scanning installed? If anyone can help, please send me a PM, thanks!

              Comment

              Working...