Canon Ir3035 nic not responding

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tibbs
    Trusted Tech

    100+ Posts
    • Aug 2008
    • 225
    #1

    Canon Ir3035 nic not responding

    Hello i have a canon Ir3035 with a connectivity issue.The network card on the machine is not responding am not sure if is the ip board or the system software. Can anyone help with this issue.I have cleared every thing in service and nothing happens.
    Thanks
    Tags: adapter, canon ir3035, center, drivers, failure, good, jobs, network, print, replace, response, send, service, software, sys, system, version, work
    • SCREWTAPE
      East Coast Imaging

      Site Contributor
      2,500+ Posts
      • Jan 2009
      • 3396
      #2
      You might wanna call Canon and open up a ticket or try replacing the main controller.
      You also should've posted this in the canon forum. You would have gotton a quicker response.

        Comment

        • linuxxpwin
          Trusted Tech
          • May 2008
          • 205
          #3
          good day

          were u able to print before? I have had this or a similar problem where I would send jobs to 3570 and no response, I ended up using the UFR11 drivers and it worked I am not saying this may work for u but you try, also it could be worth checking the network system software see it version is correct.

          linuxxpwin

            Comment

            Previous template Next
            Working...