Konica 7255 ip511a memory clear issue

[tsb13]

I am working on a km 7255 w/ip511a. Message says error memory full, clear memory.
Okay, so how do I do that. Looked everywhere and can't seem to find a way to do that.
Any help would be greatly appericated. Thanks in advance.


tsb13

[Scijohn23]

Does the ip511a boot up at all, or does it just give the error, There should be a jumper on the 511 board to reset it

[tsb13]

Thanks for the reply.
Controller boots up fine just gives message that says," error, memory full (-133628 full) - 135425 available"
Thanks
tsb13