kmc-253 SERVER DISK FULL

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • darrell b
    • Jun 2025
    #1

    kmc-253 SERVER DISK FULL

    hi can anyone help,this happens after a while the m/c displays SERVER DISK FULL, could this be m/c issue or IT related?!!
    Tags: 253, disk, disk full, displays, full, help, issue, minolta, server, server disk full
    • RRodgers
      Service Manager

      1,000+ Posts
      • Jun 2009
      • 1947
      #2
      I assume this is on a Konica Minolta C253. Does it have a Fiery attached to it? If so, use command work station to delete all the held jobs in it.
      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

        Comment

        • darrell b
          #3
          yes it is KM C-253 and no its not connected to a Fiery just straight forward network, thanks for the reply though

            Comment

            • RRodgers
              Service Manager

              1,000+ Posts
              • Jun 2009
              • 1947
              #4
              Originally posted by darrell b
              yes it is KM C-253 and no its not connected to a Fiery just straight forward network, thanks for the reply though
              Get into tech mode and format the HDD.
              Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                Comment

                Previous template Next
                Working...