Does anybody know Ricoh Af.1600 Vista drv.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • minolta35
    Trusted tech

    50+ Posts
    • Apr 2005
    • 87
    #1

    Does anybody know Ricoh Af.1600 Vista drv.

    Does anybody know when Ricoh Aficio 1600L Vista drivers can be use?We didn't make any connection on new PC's...
    Tags: af1600, drv, ricoh, tcp/ip, vista, xpx
    • Cipher
      It's not easy being green

      1,000+ Posts
      • May 2006
      • 1309
      #2
      I'm not sure I completely understand what you are asking but...

      DDST v0.90 onwards supports Vista 32bit.

      I think you need to set the TCP/IP port to 10001 instead 9100 for the GDI controller.

      Or try LPR, queue name ' lp '.
      • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

      Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

        Comment

        • iMind
          Vacuum Cleaning Expert

          1,000+ Posts
          • Mar 2008
          • 1116
          #3
          Originally posted by DaZ
          I'm not sure I completely understand what you are asking but...

          DDST v0.90 onwards supports Vista 32bit.

          I think you need to set the TCP/IP port to 10001 instead 9100 for the GDI controller.

          Or try LPR, queue name ' lp '.
          DaZ is correct you need this version in NEW! Svr 2003 x64 / Vista x64 / XPx64 DDST PrinteDriverV0.90 10/04/2008 nashua 08/04/2008 ricoh
          Last edited by iMind; 04-10-2008, 02:33 PM.
          sigpicWe can all Win, but at the end we all loose. Save the greyhound

            Comment

            • minolta35
              Trusted tech

              50+ Posts
              • Apr 2005
              • 87
              #4
              Originally posted by DaZ
              I'm not sure I completely understand what you are asking but...

              DDST v0.90 onwards supports Vista 32bit.

              I think you need to set the TCP/IP port to 10001 instead 9100 for the GDI controller.

              Or try LPR, queue name ' lp '.
              Sorry I didn't look one day.It is on...

                Comment

                Previous template Next
                Working...