FS-1118MFP (CS-1820, KM-1820) login and password in Command Center

[Guest]

Dear forum-members!
We successfully use direct scan function to all network PCs without using E-mail or FTP. It's work fine for us, but small problem is that we need in entering our usernames and passwords everytime while scanning documents. In Internet I saw the screenshot of Command Center with field for entering login and password! But we haven't this fields in our Command Center.
Is it possible to upgrade Command Center? If yes, how?
Is there any other solution (no e-mail and ftp), for no entering login and password everytime?

A zillion thanks in advance.

[peterepeat]

Unfortunately, with scanning via SMB on the 1820, there is no way around the user and password login at the control panel. What I've done is set up a user on each client computer called "a" with password "a" to make it easier on the customer. The other Falcon II's have a provision in the folder setup to enter the login & password.

[Viewmax]

Thank you for your fast reply.
My english is not so good, that's why could you explain what you mean under the phrase:
The other Falcon II's have a provision in the folder setup to enter the login & password.

Thanks in advance.

[peterepeat]

Some of the other models, KM-6030&8030(Falcon II model line) and KM-3050&4050&5050(Falcon III model line) allow you to enter the login name and password in the Command Center ahead of time so you don't have to do it each time you send.