[Misc] MX-2614N HDD

[MD Office]

Hi, forgive me if my English isn't very good. I need to create an HDD from a new and empty Toshiba HDD on a SHARP MX-2614N. Does anyone have what it takes to do it and if they can explain how to do it? I have already replaced other HDDs on this machine but they were ready. I will be very grateful to those who can help me.

[boutn]

Re: MX-2614N HDD

If you just put the empty hdd in the Sharp, it should make the required partitions by itself and boot up...

[MD Office]

Re: MX-2614N HDD

Ok so just insert the new one and it is partitioned? I have always inserted "prepared" HDDs from the supplier ...

Does it require formatting before insertion? I thank you for the answer

If you just put the empty hdd in the Sharp, it should make the required partitions by itself and boot up...

[copiertec]

Re: MX-2614N HDD

The copier automatically formats the HDD. However, once formatted, you will need to reinstall the operation manual data and the watermark data along with the latest firmware.