Canon irc3220 Feeder

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hsrmms
    Technician

    50+ Posts
    • Dec 2014
    • 69

    #1

    Canon irc3220 Feeder

    Hello

    Paper is jam when it's going out of the feeder for canon irc3220 and i can hear sound like something is locked any ideas.

    Could you kindly show me how to disassemble ADF for canon irc3220.

    Regards
    Thank you
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: Canon irc3220 Feeder

    Originally posted by hsrmms
    Hello

    Paper is jam when it's going out of the feeder for canon irc3220 and i can hear sound like something is locked any ideas.

    Could you kindly show me how to disassemble ADF for canon irc3220.

    Regards
    Thank you
    ___
    If noise is when paper is being feed out of adf tray, & into pickup\feed unit, that is a pain in the butt to replace that gear feed unit.

    Jam\Noise can also be from worn Separation Pad & Rollers.
    What is jam code_?


    If noise is from exit , that's another issue.
    Note:
    Exit Sensor actuator Arm breaks (known issue on this adf).
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • hsrmms
      Technician

      50+ Posts
      • Dec 2014
      • 69

      #3
      Re: Canon irc3220 Feeder

      Originally posted by teckat
      ___
      If noise is when paper is being feed out of adf tray, & into pickup\feed unit, that is a pain in the butt to replace that gear feed unit.

      Jam\Noise can also be from worn Separation Pad & Rollers.
      What is jam code_?


      If noise is from exit , that's another issue.
      Note:
      Exit Sensor actuator Arm breaks (known issue on this adf).
      When using ADF every thing is good until the paper exit you can here sound of something locked and paper jam in the exit path.

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: Canon irc3220 Feeder

        Originally posted by hsrmms
        When using ADF every thing is good until the paper exit you can here sound of something locked and paper jam in the exit path.

        two pdf's to look at/ one about reverse flapper usually never worked

        u will need to remove the reverse delivery unit to inspect>replace./see pdf

        i never repair them > always order a new one (
        Attached Files
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • hsrmms
          Technician

          50+ Posts
          • Dec 2014
          • 69

          #5
          Re: Canon irc3220 Feeder

          Originally posted by teckat
          two pdf's to look at/ one about reverse flapper usually never worked

          u will need to remove the reverse delivery unit to inspect>replace./see pdf

          i never repair them > always order a new one (
          THANK YOU

          Comment

          Working...