Image runner advance c 7065 i

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • khattab.al.masry
    Trusted Tech
    • Jan 2014
    • 212

    #1

    [Error Code] Image runner advance c 7065 i

    We facing problem with our IR adv. c7065i that display error code E073-0001.
    as mentioned in service manual check interlock switch.
    we searched about this switch can not found it.
    thanks.
  • dan7777
    Senior Tech

    500+ Posts
    • Dec 2012
    • 680

    #2
    Re: Image runner advance c 7065 i

    Originally posted by khattab.al.masry
    We facing problem with our IR adv. c7065i that display error code E073-0001.
    as mentioned in service manual check interlock switch.
    we searched about this switch can not found it.
    thanks.
    I have not had that code but the canon web site mentioned to make sure your software is up to date.

    Comment

    • disam
      Technician

      50+ Posts
      • Sep 2008
      • 64

      #3
      Re: Image runner advance c 7065 i

      check the switch actuator for SW5, if it is dislodged - set back in place.

      or

      the PS80 Front Cover Sensor is faulty. Replace the sensor. Part number WG8-5783-000
      Last edited by disam; 09-04-2015, 07:50 AM.

      Comment

      • albionjames
        Junior Member
        • May 2015
        • 3

        #4
        Re: Image runner advance c 7065 i

        Originally posted by khattab.al.masry
        We facing problem with our IR adv. c7065i that display error code E073-0001.
        as mentioned in service manual check interlock switch.
        we searched about this switch can not found it.
        thanks.
        Hi, sorry a bit late but ive had the relay PCB cause this

        Did you resolve the issue at all?

        cheers

        Comment

        • khattab.al.masry
          Trusted Tech
          • Jan 2014
          • 212

          #5
          Re: Image runner advance c 7065 i

          [QUOTE=disam;487990]check the switch actuator for SW5, if it is dislodged - set back in place.



          Thank you very much we checked switch actuator for SW5 (delivery door switch) as your advice and found that was not dislodged we solved the problem by retuning the actuator to its normal position.
          Attached Files

          Comment

          Working...