Canon iradv-6055 finisher jaming

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mramlawi
    Senior Tech

    500+ Posts
    • Jul 2011
    • 838

    #1

    Canon iradv-6055 finisher jaming

    Dear all
    i have a canon ir-adv 6055 when makein a many copies the paper stopped on the exit of the finisher and it gave a jam. I checked the jam location just display (ohm ) as i remember what is that mean ,
    Distinguished road makes you jewel in rough
  • vigour
    Service Manager

    1,000+ Posts
    • Aug 2010
    • 1038

    #2
    Re: Canon iradv-6055 finisher jaming

    Check again.
    I have never seen that "ohm"

    Comment

    • mramlawi
      Senior Tech

      500+ Posts
      • Jul 2011
      • 838

      #3
      Re: Canon iradv-6055 finisher jaming

      Hi the jam shows othm jam the paper jams papers stuck inside the finisher and paper jams when entering the finisher.
      Attached Files
      Distinguished road makes you jewel in rough

      Comment

      • Tricky
        Field Supervisor

        Site Contributor
        2,500+ Posts
        • Apr 2009
        • 2621

        #4
        Re: Canon iradv-6055 finisher jaming

        Originally posted by mramlawi
        Dear all
        I checked the jam location just display (ohm ) as i remember what is that mean ,
        Do you mean "other" found this it might help

        imageRUNNER ADVANCE 8085 / 8095 / 8105

        Problem :
        Jam code 0CA4 is occurring at times.

        Jam code 0CA4 is described as a "Page Complete Time Out jam". Also defined as a "other Jam". No particular sensor is designated for the jam code.

        Solution :
        In this case, flashing/upgrading all software for every piece of equipment and once all software was flashed, performing DC CON Clear in service mode, resolved the service issue of jam code 0CA4 from reoccurring.

        Comment

        • mramlawi
          Senior Tech

          500+ Posts
          • Jul 2011
          • 838

          #5
          Re: Canon iradv-6055 finisher jaming

          Originally posted by skynet
          Do you mean "other" found this it might help

          imageRUNNER ADVANCE 8085 / 8095 / 8105

          Problem :
          Jam code 0CA4 is occurring at times.

          Jam code 0CA4 is described as a "Page Complete Time Out jam". Also defined as a "other Jam". No particular sensor is designated for the jam code.

          Solution :
          In this case, flashing/upgrading all software for every piece of equipment and once all software was flashed, performing DC CON Clear in service mode, resolved the service issue of jam code 0CA4 from reoccurring.
          Aha thanka for ur post yea its shows other jam and theres no indecation wheres the jam ,that mean i must update the machine must work fine,the werid problem that when i change the finisher and use it to another machine it make same problem and then it works fine but i dont know when my client will call me again.
          Distinguished road makes you jewel in rough

          Comment

          Working...