Broken gear of the drum magenta on iRADVC 7260.

[Ingranaggio_rotto]

Here I am again ! ! !
And I have a mystery to solve worthy of Sherlock Holmes ...

I have a iRADVC 7260 that after (about) 30.000 prints, it breaks the gear of the drum Magenta....

And only of the drum magenta ! ! !

Some know the solution at this problem ? ? ?
Thank you !

[teckat]

Re: Broken gear of the drum magenta on iRADVC 7260.

Here I am again ! ! !
And I have a mystery to solve worthy of Sherlock Holmes ...

I have a iRADVC 7260 that after (about) 30.000 prints, it breaks the gear of the drum Magenta....

And only of the drum magenta ! ! !

Some know the solution at this problem ? ? ?
Thank you !

-------;-'
Broken Drum Drive Coupling (::-(

Always remove the drum assembly when removing the drum shaft.
End of shaft could be breaking drum gear.
Drum drive shaft assembly (FM3-4727-010), timing belt (XF2-1606-740),22T pulley (FU7-0999-000) and 25T/50T gear. ?

M drum motor (all the same) FM4-6616-000)_?
FM0-0866-000, DRUM DRIVE ASSBLY (Y/M/C) 7200/9200 series)_?

[vigour]

Re: Broken gear of the drum magenta on iRADVC 7260.

You could switch out the magenta drive to a different colour and see if the pattern continues.
Let us know the outcome

I have seen a high number of 72 series break drums , mostly magenta usually close to 100% life.
a few have broken all 3 at different times.

My theory is that they changed the plastic
I am now seeing 70 series break.
They never broke before 72's came out.
The only thing to figure out is why mainly magenta

[mramlawi]

Re: Broken gear of the drum magenta on iRADVC 7260.

I have same thing on 9280pro the yellow and meganta drums gear are broken, and after i changed the y drum with a used one also broken the machine started to give me e 0025-0110 and then -0210

[zoraldinho]

Re: Broken gear of the drum magenta on iRADVC 7260.

magenta and yellow are most affected (always busy)




Capture.jpg