If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
please help i am gettng this error code e0000760002-05 and i dont know what it is.. i can't even find it in the error code lists. PLEASE HELP!
e000076-0002-05
read as---
E076
Error in ITB web 0002= Error: absence of ITB web.
When detecting the absence in ITB web.
Replace the ITB web
Error code notation
An error code is shown in 7-digit [E000XXX] on the display on the operation panel. However, [000] in 2 to 4 digit is not used. Thus, an error code is described as
[EXXX] using 5 to 7 digit in the service manual. (e.g.: E000012 = E012)
Exxxxxx-yyyy-aa
xxxxxx: error code yyyy: sub-code aa: location Location grouping
0 : main controller/POD deck light
1 : DADF
2 : finisher / insertion unit / panch unit / booklet trimmer / two-knife booklet trimmer
4 : reader unit
5 : printer unit
6 : PDL board
11 : POD deck
12 : secondary POD deck
31 : professional puncher / professional puncher integration unit
51 : stacker / High Capacity Stacker-F1
52 : additional stacker / High Capacity Stacker-F1
61 : perfect binder
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment