If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi, I have jamming problem in Document feeder IR3245, Jam Type STNRY Sensor NO. SR1.
Please I need your help
Thanks
You might want to clean the clutches in the ADF, they usually get rusty and have issues. Just use alcohol to clean them ( you have to take them apart to do this)
You might want to clean the clutches in the ADF, they usually get rusty and have issues. Just use alcohol to clean them ( you have to take them apart to do this)
Comment