Canon ir2530 machine hang

[Blues Guy]

Hi guys,

Have 1 unit Canon ir2530 when you "ON" the machine you can see the status bar will boot up to half then the machine will freeze hang. If you keep waiting the machine will back to initial rotation again. Sometimes when its ready to copy the panel will freeze you can't press any button to function.

Have change main controller but still same problem. Any idea guys what's wrong with it

[Tricky]

Re: Canon ir2530 machine hang

have you tried swapping or cleaning the dimm on the main controller?

[tamboknon]

Re: Canon ir2530 machine hang

I have encountered that problem try to isolate the Main con sir.

[semsros]

Re: Canon ir2530 machine hang

Hi guys,

Have 1 unit Canon ir2530 when you "ON" the machine you can see the status bar will boot up to half then the machine will freeze hang. If you keep waiting the machine will back to initial rotation again. Sometimes when its ready to copy the panel will freeze you can't press any button to function.

Have change main controller but still same problem. Any idea guys what's wrong with it

It look like my machine's problem,
1. Eject the Network Cable from the machine
2. Eject the battery behind the main controller PCB
3. To service mode * > 2 > 8 * >clear > all
If still not working , please try to clean or change Boot Room