Canon GX-300 didnt startup

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dragsprit
    Technician
    • Oct 2014
    • 27
    #1

    Canon GX-300 didnt startup

    i have a Canon GX-300.
    when i press open button. the mainboard only starts fans.
    fiery's LCD didnt light.
    i try
    1. bios reset
    2. change power supply.
    3. unmount and remount cpu.
    4. take off HD,CD,and fiery card to see if it starts without them.
    5. take off rams .doesnt turn on and no beeps.
    also try to swap rams each other.


    is it possible to change the mainboard with any other new board.
    or fiery card is assigned to that board.

    thanks
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: Canon GX-300 didnt startup

      No Display With only a Blinking Amber LED___?

      Replace HDD\ reload firmware
      FE1-6118-000_ HDD

      Also check the Video Board.
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • dragsprit
          Technician
          • Oct 2014
          • 27
          #3
          Re: Canon GX-300 didnt startup

          hi teckat

          light is not blinking.
          it was just light up at amber color.
          i take hdd cables also.just to see if it starts the monitor.
          it didnt do anything.
          cant we use a new board with fiery card and reload the firmware.

            Comment

            Previous template Next
            Working...