Message : Prepaire to replace fixing roller ira c7065

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • browny
    Technician

    50+ Posts
    • Nov 2010
    • 81
    #1

    Message : Prepaire to replace fixing roller ira c7065

    Hello All.
    I have 2 machines Canon IRC ADVANCE C7065 : have messages : PREPAIRE TO REPLACE FIXING ROLLER ( on the screen ) : Do we need to replace upper fixing unit & Base fuser OR reset it ( how ) ... Please help. THANK YOU.
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: Message : Prepaire to replace fixing roller ira c7065

      Originally posted by browny
      Hello All.
      I have 2 machines Canon IRC ADVANCE C7065 : have messages : PREPAIRE TO REPLACE FIXING ROLLER ( on the screen ) : Do we need to replace upper fixing unit & Base fuser OR reset it ( how ) ... Please help. THANK YOU.

      Estimate / U need to inspect
      ●: Replacement (Consumable parts)----COUNTER reset after replacement
      Fixing Belt Unit---400k--------------DRBL-1 FX-BLT-U
      Pressure Belt Unit---500k-----------DRBL-1 FX-BLT-L



      FXMSG-SW ON/OFF of Fixing Ass’y rplce warning dis
      Level.2 Details To set whether to display the warning prompting to replace the Fixing
      Assembly on the Control Panel when the Fixing Assembly reaches its life.
      Criteria for judging the life differ, depending on the setting value of
      FXMSGSW2.

      FXMSGSW2 = 0: Fixing Assembly Motor current value + Fixing Belt
      Unit rotation time
      FXMSGSW2 = 1: Items above + Total number of sheets fed on
      Fixing Belt Unit
      Factor at warning occurrence is identified in accordance with CODE
      column of log displayed in COPIER> DISPLAY> ALARM-2.
      • 06-0004: Current value of the Fixing Assembly Motor (FXMTR2
      to 8)
      • No log: Rotation time of the Fixing Belt Unit (FX-U-TM1)
      • 06-0002: Total number of sheets fed on Fixing Belt Unit (FXBLT-
      U)
      Display/adj/set range 0 to 1
      0: OFF, 1: ON
      Default value 1
      Related service mode COPIER> OPTION> DSPLY-SW> FXMSGSW2
      COPIER> DISPLAY> ALARM-2
      COPIER> DISPLAY> FIXING>FX-MTR2 to 8, FX-U-TM1
      COPIER> COUNTER> DRBL-1> FX-BLT-U
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • browny
          Technician

          50+ Posts
          • Nov 2010
          • 81
          #3
          Re: Message : Prepaire to replace fixing roller ira c7065

          THANK YOU VERY MUCH TECKAT. VERY HELPFUL INFORMATION. YOU ARE THE MOUNTAIN OF TECNOLOGY ... Best wished to your coming NEW YEAR , heathy , happy & success .

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: Message : Prepaire to replace fixing roller ira c7065

              Originally posted by browny
              THANK YOU VERY MUCH TECKAT. VERY HELPFUL INFORMATION. YOU ARE THE MOUNTAIN OF TECNOLOGY ... Best wished to your coming NEW YEAR , heathy , happy & success .


              Welcome !! / Have a Healthy n' Safe New Year
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • MrB
                  Trusted Tech

                  100+ Posts
                  • Nov 2009
                  • 147
                  #5
                  Re: Message : Prepaire to replace fixing roller ira c7065

                  One thing you can do (Ive seen done by other engineers) is turn the option to stop that message being displayed
                  Personally, I would leave it switched, otherwise, you could end up with error messages pointing towards the fixing belts when there past life
                  fixing msg.jpg

                    Comment

                    Previous template Next
                    Working...