Canon IR 3245 hard drive install

[Hopper]

I sell refurbished copiers. Recently I bought a 3245 from a wholesaler. The hard drive had been erased by a security program. I bought a replacement HD with the boot software from Hytec. I installed all the software and everything is up and running.

My question: originally this was a 3245 with the D1e print package installed for printing and Universal send. How do I know if that package was reloaded when I used the SST? I can't get it to be seen by MAC or IBM. It did get an ip address DHCP, it does ping and the Send screen is there for email and folder. Then boot ROM is 3.25_ The license and product key page is attached to the back of the machine for the D1e print/Universal send.

[tporter880111]

Re: Canon IR 3245 hard drive install

The accessories kits you are referring to are not installed on the hdd they are activated in the copier's pcb. You can go to the meter page and select devices to see what kits are installed. Changing an hdd will not effect these kits. If you need kits you can buy them at epartsroom.com. Good luck

[charm5496]

Re: Canon IR 3245 hard drive install

Any options that are installed from a license do not reside on the HDD, so when the HDD is replaced you do not have issues with options having to be reinstalled.
You can check these options under the counter check button for easy reference

[Hopper]

Re: Canon IR 3245 hard drive install

Any options that are installed from a license do not reside on the HDD, so when the HDD is replaced you do not have issues with options having to be reinstalled.
You can check these options under the counter check button for easy reference

Thank you very much. Machine is running.