Canon IRAdv C5051 showing Message board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • niyaskarimba
    Trusted Tech
    • Sep 2014
    • 110

    #1

    [Misc] Canon IRAdv C5051 showing Message board

    One of My IRAdv C5051 showing one "Message Board- Reading logs..
    in progress....
    please be patient.
    Thank you..


    Already cleared message board suport link through RUI,also try to change the hardisc.........but still same
    Attached Files
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: Canon IRAdv C5051 showing Message board

    Originally posted by niyaskarimba
    One of My IRAdv C5051 showing one "Message Board- Reading logs..
    in progress....
    please be patient.
    Thank you..


    Already cleared message board suport link through RUI,also try to change the hardisc.........but still same

    :-D
    Message should be cleared by performing MMI clear.
    OK, then Power cycle machine Off and then back On.

    MMI Clear will remove information pertaining to the Machine User Settings, such as, ID Modes, ID Group, Passwords, Mode Memory, IP Addresses and network settings. It does not delete address book.
    Re-enter Network information:
    Go to Preferences > Confirm Network connection Set changes and Turn On > TCP/IP settings > IPv4 Settings > IP Address Settings and re-enter information. Close the window and re-boot copier to a working condition.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • niyaskarimba
      Trusted Tech
      • Sep 2014
      • 110

      #3
      Re: Canon IRAdv C5051 showing Message board

      Originally posted by teckat
      :-D
      Message should be cleared by performing MMI clear.
      OK, then Power cycle machine Off and then back On.

      MMI Clear will remove information pertaining to the Machine User Settings, such as, ID Modes, ID Group, Passwords, Mode Memory, IP Addresses and network settings. It does not delete address book.
      Re-enter Network information:
      Go to Preferences > Confirm Network connection Set changes and Turn On > TCP/IP settings > IPv4 Settings > IP Address Settings and re-enter information. Close the window and re-boot copier to a working condition.
      Its working now......thanks

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: Canon IRAdv C5051 showing Message board

        Originally posted by niyaskarimba
        Its working now......thanks

        so MMI Clear worked !!!!
        welcome

        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        Working...