good
I have problems with canon 7000 imagePRESS always densities values (display) are negative, indicating that toner is asking
values are in -2.8 C / M / Y / BK my question is if there is a way or some seteo on the computer so it will not constantly adding more toner since I changed by developers and calibration are performed always DENS negative and sprinkle toner throughout the machine.
could also help if there is any change in the sub hopper toner because if there is any improvement because there too the toner falls
thanks
I have problems with canon 7000 imagePRESS always densities values (display) are negative, indicating that toner is asking
values are in -2.8 C / M / Y / BK my question is if there is a way or some seteo on the computer so it will not constantly adding more toner since I changed by developers and calibration are performed always DENS negative and sprinkle toner throughout the machine.
could also help if there is any change in the sub hopper toner because if there is any improvement because there too the toner falls
thanks