Noise ira7260

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dan7777
    Senior Tech

    500+ Posts
    • Dec 2012
    • 680

    #1

    Noise ira7260

    Squeak noise is in right upper side. Motor 23 runs itb and black drum. I took itb out and could not find anything. Going back to look at drum assembly. Saw comments about somewhere it makes noise but not sure. Have had squeaks from black developer but was replaced two months ago. Machine runs all day and at 1.9 million clicks. Anyone who fixed squeaks, noise in this area 7260 color would appreciate help! Squeak starts when copy made. Forgot to do single color only but squeaks at motor 23 check.
  • Tricky
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 2620

    #2
    Re: Noise ira7260

    Location:
    Developing drive asembly (Bk)
    Subject:
    Measure against the problem when noise occurs from the rear right of the main
    Symptom
    Noise may occur from the rear right of the main body at the time of operation.

    see pdf

    7260 noise.pdf

    Comment

    • dan7777
      Senior Tech

      500+ Posts
      • Dec 2012
      • 680

      #3
      Re: Noise ira7260

      Originally posted by skynet
      Location:
      Developing drive asembly (Bk)
      Subject:
      Measure against the problem when noise occurs from the rear right of the main
      Symptom
      Noise may occur from the rear right of the main body at the time of operation.

      see pdf

      [ATTACH]32278[/ATTACH]

      Wow, thanks. I am going to do this tomorrow. Will report back first chance I get!

      Comment

      • dan7777
        Senior Tech

        500+ Posts
        • Dec 2012
        • 680

        #4
        Re: Noise ira7260

        Originally posted by dan7777
        Wow, thanks. I am going to do this tomorrow. Will report back first chance I get!
        Got rid of squeak back right side but customer says there is still a noise I can not hear. Boss said he will go with me to listen. I can not hear really high pitch and haven't for years so it must be high. Took about 1/2 hour or so to lube behind gears, very easy.

        Comment

        Working...