Canon ir2220 can't connect to print yet can connect to the web admin page??

[nkm]

Hi,

Not a copy tech but an IT person who's installed many network printers and copiers.

We just bought a refurb Canon ir2220 from a used copy store. They're not being much help so I'm hoping to see if anyone has a suggestion.

I've tried installing this network copier on 3 different computers, using two different methods and I can't get it to print.

Method 1) Standard "add a printer"

Added it like any other printer. Added a new port pointing to it's IP address. When I try this method, it says the device cannot be contacted over the network and gives me a list of device network cards. I've tried to install it with the generic network card in the windows list. It will install, but not print and show as "needs troubleshooting". Troubleshooting reveals it cannot be contacted through the network.

Method 2) Newest Canon install software / driver

It won't find the printer automatically and when I add it manually, I get stopped at the same place after entering a new port with the ip address of the copier. It says "additional port information required, the device is not found on the network......"

I've diagnosed it as a network card issue but to my surprise it registered itself with our network and allows for the web admin access.

Below is the network information from the web admin page. Thoughts?

[nkm]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

Network

	Physical Interface :	Ethernet
	Ethernet Driver Settings :	Auto Detect
	MAC Address :	******REMOVED******
	Use Spooler :	On
	Use SNMP :	Off
	Enable Dedicated Port :	Off

Protocol

---

TCP/IP

DHCP : Off RARP : Off BOOTP : Off IP Address : 192.168.10.21 Subnet Mask : 255.255.255.0 Gateway Address : 192.168.10.1 Primary Server : 192.168.10.1 Secondary Server : 0.0.0.0 Host Name : Canon-iR2220 Domain Name : alternatives.local DNS Dynamic Update : Off WINS Resolution : Off WINS Server IP Address : 0.0.0.0 Node Type : b Node Scope ID : Use LPD : Off LPD Banner Page : Off Use RAW : Off Use IPP : On Use HTTP : On Use Proxy : Off HTTP Proxy Server Address : HTTP Proxy Server Port Number : 80 Use Proxy within the Same Domain : Off RX/Print Range Reject IP Address : Off Permit IP Address : Off 192.168.10.1-192.168.10.200 Setting/Browsing Range Reject IP Address : Off Permit IP Address : Off

NetWare

Frame Type : Auto Detect IPX External Network Number : 00000000 Node Number : 000000000000 Print Service : NDS PServer Tree : Context : Print Server : Print Server Password: Printer Number: 0 Service Mode: Minimize form changes within print queues Printer Form: 0 Polling Interval: 5 seconds Buffer Size: 20 KB

AppleTalk

Phase : Phase 2 Service Name : iR2220 Zone : *

SMB

Use SMB : On Server : Printer : Workgroup Name : workgroup Comment : LM Announce : Off

---

[Tricky]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

Hi does the machine look like this ?

[nkm]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

Yes it does

I'm looking at the settings a bit further. I didn't set the domain name alternatives.local. Might that be the issue?

[Hopper]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

Yes it does

I'm looking at the settings a bit further. I didn't set the domain name alternatives.local. Might that be the issue?

Set it to DHCP in the same screen as you would put in the IP address. Highlight the DHCP button and reboot. I am assuming that this model has the network Boot chip installed.

[ZOOTECH]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

Pardon my ignorance, but why is the MAC address "Removed"?

[Hopper]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

Yes it does

I'm looking at the settings a bit further. I didn't set the domain name alternatives.local. Might that be the issue?

Use RAW should be on.

[nkm]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

Hey everyone,

1) I removed the domain name completely
2) I tried DHCP on
3) I turned on RAW

Still no dice. Could the network card still be defective even though it's registering and accessible through the web? Is there a firmware update I could try?

Is there a way to factory reset the unit? I feel that the used copy place didn't do a great job at cleaning out the old network settings and something may still be actively working against us.

Also, I removed the MAC address since I didn't know if it was directly traceable. Force of habit when on server forums (removing all information tied to the server).

[nkm]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

TCP/IP DHCP : On RARP : Off BOOTP : Off IP Address : 192.168.10.60 Subnet Mask : 255.255.255.0 Gateway Address : 192.168.10.1 Primary Server : 192.168.10.1 Secondary Server : 0.0.0.0 Host Name : Canon-iR2220 Domain Name : DNS Dynamic Update : On WINS Resolution : Off WINS Server IP Address : 0.0.0.0 Node Type : b Node Scope ID : Use LPD : Off LPD Banner Page : Off Use RAW : On Use IPP : On Use HTTP : On Use Proxy : Off HTTP Proxy Server Address : HTTP Proxy Server Port Number : 80 Use Proxy within the Same Domain : Off RX/Print Range Reject IP Address : Off 134.90.115.168 134.90.115.176 134.90.115.184 134.90.115.192 134.90.115.200 134.90.115.208 134.90.115.216 134.90.115.224 Permit IP Address : Off 134.90.115.232 134.90.115.240 134.90.115.248 134.90.116.0 134.90.116.8 134.90.116.16 134.90.116.24 134.90.116.32 Setting/Browsing Range Reject IP Address : Off 134.90.116.40 134.90.116.48 134.90.116.56 134.90.116.64 134.90.116.72 134.90.116.80 134.90.116.88 134.90.116.96 Permit IP Address : Off 134.90.116.104 134.90.116.112 134.90.116.120 134.90.116.128 134.90.116.136 134.90.116.144 134.90.116.152 134.90.116.160 NetWare Frame Type : Auto Detect IPX External Network Number : 00000000 Node Number : 000000000000 Print Service : NDS PServer Tree : Context : Print Server : Print Server Password: Printer Number: 0 Service Mode: Minimize form changes within print queues Printer Form: 0 Polling Interval: 5 seconds Buffer Size: 20 KB

AppleTalk Phase : Phase 2 Service Name : iR2220 Zone : *

SMB Use SMB : On Server : Printer : Workgroup Name : workgroup Comment : LM Announce : Off

[Tricky]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

where's your mac address?

service mode > copier > function > clear > mmi ok

nothing else.

press the yellow reset button to exit service mode

reboot the machine, and turn on dhcp and restart again

[nkm]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

where's your mac address?

service mode > copier > function > clear > mmi ok

nothing else.

press the yellow reset button to exit service mode

reboot the machine, and turn on dhcp and restart again

Mac address:

00008538E3B5 Trying that now. Thanks.

[nkm]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

where's your mac address?

service mode > copier > function > clear > mmi ok

nothing else.

press the yellow reset button to exit service mode

reboot the machine, and turn on dhcp and restart again

Thank you so much, this worked.

What did that indicate for my own knowledge? Old setting issue?

[Tricky]

Re: Canon ir2220 can't connect to print yet can connect to the web admin page??

Thank you so much, this worked.

What did that indicate for my own knowledge? Old setting issue?

Glad to help, yeah it was a setting and the mmi clear resets the network config.